Thursday, October 1, 2009

Royal Enfield tour of Rajasthan

Feel the sands, the desert heat and the night chill, ride the dunes in Thar and ride open roads that disappear into the horizon. Discover a Fort made from Jurassic stone, ancient trees that have turned to stone, Palace that some say is as beautiful (if not more) as Taj, hypnotic stunning Haveli, the Battle of Braves where a 100 defeated 1000s. Ride the road to Pakistan but be careful - don’t cross over, walk through a sea of rats, go flat out on salt flats, eat rich food, stay in the lap of luxury but don’t miss out on the camp, the folks and their dances and songs. Experience an age old culture in festive mood in all its splendor and colour… a Royal Ride through the Sands of Time.

Click here to download the registration form for Royal Enfield tour of Rajasthan.

Royal Enfield tour of Rajasthan | Bike preparation

Shared via

1. At ground level the most important thing is your tyres and your wheels. Ensure that you have adequate tread on them. We recommend you start the ride with a brand new set of tyres and tubes; you are less likely to face punctures etc.

2. Get the rims balanced (this will prevent breaking of spokes and unnecessary wobbles that could spoil your bike's ride and handling). When you are getting your wheels balanced make sure that the spokes are not protruding from inside the rim. If they are they could puncture the tube from inside. After this, ensure that there is a rubber strip (good condition) around the inside of the rim. When you disassemble the wheels, check the wheel bearings as well.

3. Inspect and make sure that your bike has only genuine OE parts, especially hubs, spokes, rims and other engine components. We cannot provide support for modified items and in such case you are requested to carry your own spares. We can make arrangements to carry them in the service truck.

4. Get your shock absorbers inspected. They should be in top working order. Check the bushes for the rear shock absorbers and replace if necessary.

5. Check condition of front fork oil seals and replace if needed. Make sure that there is no crack on the fork bottom tube. If your springs have sagged or your main tube has worn out get them replaced.

6. Check the rear swing arm bush and replace if needed.

7. Check your chain and rear sprocket for wear. If you find that there are less than four notch adjustments to go on your chain adjuster cam, replace your chain and both your sprockets.

8. Your bike's clutch is really crucial for this trip, so make sure that your clutch is in good order and adjusted properly without the trace of any drag, slip etc. When you open your clutch cover, also check the primary chain and the adjuster. Do not use any kind of additional insert under the chain adjuster. If the adjuster has reached its limit replace the primary chain.

9. Check your battery and the earthing connections. If you have any history of electrical trouble, be sure that the problem is completely solved. The vibrations, dust and maybe water that riders are likely to encounter on the route could further accentuate existing problems.

10. Check for play in the steering column and replace the ball race joints if necessary.

11. Check all the rubber components like carburetor hose, fuel lines, air filter rubber etc for cracks and tears and replace if in doubt.

12. Check all cables and if found bent of frayed, replace immediately. Do not use oil in friction free cables.

13. Finally tighten all the nuts and bolts and if it is found to slip or the threads are damaged replace the relevant parts.


This is a very crucial part.

If your bike is working fine let it be. It would be a good idea to do a weekend trip to try it out and see how it behaves. It would be a good idea to ride a new bike and make sure that your bike is up to the mark. If there is any doubt please visit your Royal Enfield showroom. Do not leave the fixing of your bike to the last min and start the trip with an untested bike.

Things to avoid on the bike

1. Anything that is likely to take a beating from rough roads and vibrations, this includes:
• Extra lights
• Extra horns
• Extra mirrors
• Heavy after market horns
• Side boxes
• any other unnecessary add-ons

2. Non standard high rise or low handlebars.

3. Alloy wheels.

4. Some number plates fitted on the front mudguard are likely to break the headlamp at full travel.

5. Smaller wheels if they drastically reduce your ground clearance.

6. Imported street tyres, as these could puncture and suffer for grip on dirt surfaces.

7. Extended front forks.

8. Modified swing arms.

9. Shortened or extended chassis, chain.

10. You should either remove any non standard item from your bike or be prepared to service it on your own.